ZQZIP®- Water-cooled Screw Type Chiller

Enquiry

MAIN TECHNICAL PARAMETERS:

Parameter/Model ZQZIP®-
100.1 135.1 180.1 195.1 235.1 260.1 305.1 320.1 350.1 385.1
Cooling Capacity KW 100 135 180 195 235 260 305 320 350 385.1
10⁴kcal/h 8.6 11.6 15.5 16.8 20.3 22.4 26.3 27.6 30.2 33.2
Operation Control Type PLC Programmable Controller Automatic Control
Power Supply 380V/3N/50Hz
Compressor Type 5-6 Non Symmetrical Half Closed Double Screw Compressor
Quantity 1 unit
Startup Type Y-△ Start-up
Energy Regulation 0-33-66-100% 0-25%-50%-75%-100%
Input Power KW 22.6 29.8 37.3 41 49.9 54.3 61.1 64.3 70.8 78
Rated Current A 39.3 51.9 64.9 71.3 86.8 94.5 106.3 111.9 123.2 135.7
Evaporator Type High Efficiency Shell and Tube Dry Heat Exchanger
Water Flow M³/h 17.2 23.2 31 33.6 40.6 44.8 52.6 55.2 60.4 66.4
Pipe Diameter DN65 DN80 DN100 DN125
water Pressure Drop Kpa 48 48 50 50 50 52 54 55 55 58
Condenser Type High Efficiency Shell and Tube Heat Exchanger
Water Flow M³/h 21.5 29 38.7 41.9 50.5 55.9 65.6 68.8 75.3 82.8
Pipe Diameter DN65 DN80 DN100 DN125
water Pressure Drop Kpa 46 46 47 47 48 49 51 53 53 56
Refrigerant Type R22a/R407c/R134a/R410a
Filling Quantity kg 20 27 36 39 47 52 61 64 70 77
Dimension Length mm 2100 2360 2450 2860 2860 2860 2860 2860 2860 3225
Width mm 700 700 900 900 900 900 900 900 900 900
Height mm 1410 1520 1580 1600 1720 1745 1450 1770 1880 1960
Unit Weight kg 850 1050 1270 1340 1640 1680 1720 1750 2080 2300
Run Weight kg 900 1150 1420 1540 1890 1940 1990 2050 2330 2550
Parameter/Model ZQZIP®-
420.1 500.1 530.1 570.1 610.1 635.1 740.1 815.1 865.1 965.1
Cooling Capacity KW 420 500 530 570 610 635 740 815 865 965
10⁴kcal/h 36 43 46 49 53 55 64 70 75 83
Operation Control Type PLC Programmable Controller Automatic Control
Power Supply 380V/3N/50Hz
Compressor Type 5-6 Non Symmetrical Half Closed Double Screw Compressor
Quantity 1 unit
Startup Type Y-△ Start-up
Energy Regulation 0-25%-50%-75%-100%
Input Power KW 84.1 99.7 105.2 114 122.8 126.7 147.5 162 172 193.4
Rated Current A 146.3 173.5 183 198.4 213.7 220.5 256.7 281.9 299.3 336.5
Evaporator Type High Efficiency Shell and Tube Dry Heat Exchanger
Water Flow M³/h 72 86 92 98 106 110 128 140 150 166
Pipe Diameter DN125 DN150
water Pressure Drop Kpa 60 62 67 68 68 69 69 70 70 70
Condenser Type High Efficiency Shell and Tube Heat Exchanger
Water Flow M³/h 90.3 107.5 114 122.6 131.2 136.5 159.1 175.2 186 207.5
Pipe Diameter DN125 DN150
water Pressure Drop Kpa 56 60 65 65 67 67 68 68 68 68
Refrigerant Type R22a/R407c/R134a/R410a
Filling Quantity kg 84 100 105 113 121 126 127 162 172 192
Dimension Length mm 3225 3225 3505 23605 3605 3720 3720 3930 3930 4230
Width mm 900 900 900 900 900 1100 1100 1100 1100 1100
Height mm 1960 2010 2010 2080 2110 2110 2110 2110 2150 2150
Unit Weight kg 2570 2850 2900 3100 3450 3600 3850 4050 4230 5150
Run Weight kg 3950 3000 3200 3450 3750 3900 4180 4450 4600 5650

Note:

1. The nominal operating cinditions are follows:frozen water inlet/outlet temperature of 12℃/7℃;cooling water inlet/outlet temperature of 30℃/35℃.

2. Temperature conditions: the water outlet temperature of chilled water temperature range of 5℃-15℃, cooling water inlet temperature range of 19℃-33℃.

3.The water side of the evaporator and condenser design to withstand the pressure of 1.0MPa.

4. The nominal operating conditions in the evaporator water side fouling coefficient of 0.018m²℃/kw, condenser water side fouling coefficient of 0.044m²℃/kw.

5. In addition to the above specifications and requirements, the company can provide non-standard products according to customer requirements.

Parameter/Model ZQZIP®-
200.2 270.2 360.2 390.2 470.2 520.2 610.2 640.2 700.2 770.2
Cooling Capacity KW 200 270 360 390 470 520 610 640 700 770
10⁴kcal/h 17.2 23.3 31 34 40.5 44.8 52.6 55.2 60 66
Operation Control Type PLC Programmable Controller Automatic Control
Power Supply 380V/3N/50Hz
Compressor Type 5-6 Non Symmetrical Half Closed Double Screw Compressor
Quantity 1 unit
Startup Type Y-△ Start-up
Energy Regulation 0-16.5-33-50-66-83.5-100% 0-12.5-25-37.5-50-62.5-75-87.5-100%
Input Power KW 45.2 60 75 82 99.8 108.6 122.2 128.6 141.6 156
Rated Current A 78.6 103.7 129.8 142.7 173.7 189 212.6 223.8 246.4 271.4
Evaporator Type High Efficiency Shell and Tube Dry Heat Exchanger
Water Flow M³/h 34.4 46.6 62 68 81 89.6 105.2 110.4 120 132
Pipe Diameter DN80 DN100 DN125 DN150
water Pressure Drop Kpa 50 52 52 53 54 55 55 55 60 68
Condenser Type High Efficiency Shell and Tube Heat Exchanger
Water Flow M³/h 43 58.1 77.4 83.9 101.1 111.8 131.2 137.6 150.5 165.6
Pipe Diameter DN65×2 DN80×2 DN100×2 DN125×2
water Pressure Drop Kpa 45 45 45 47 50 52 53 55 58 60
Refrigerant Type R22a/R407c/R134a/R410a
Filling Quantity kg 40 54 72 78 94 103 121 127 139 153
Dimension Length mm 3370 3370 3470 3470 3500 3500 3500 3600 3780 3780
Width mm 900 900 1100 1100 1300 1300 1300 1300 1300 1300
Height mm 1440 1440 1530 1580 1760 1780 1820 1875 1970 1980
Unit Weight kg 1650 1850 2300 2400 2800 3000 3100 3200 4000 4500
Run Weight kg 1900 2150 2550 2750 3350 3550 3600 3750 4450 4950

Note:

1. The nominal operating cinditions are follows:frozen water inlet/outlet temperature of 12℃/7℃;cooling water inlet/outlet temperature of 30℃/35℃.

2. Temperature conditions: the water outlet temperature of chilled water temperature range of 5℃-15℃, cooling water inlet temperature range of 19℃-33℃.

3.The water side of the evaporator and condenser design to withstand the pressure of 1.0MPa.

4. The nominal operating conditions in the evaporator water side fouling coefficient of 0.018m²℃/kw, condenser water side fouling coefficient of 0.044m²℃/kw.

5. In addition to the above specifications and requirements, the company can provide non-standard products according to customer requirements.

Parameter/Model ZQZIP®-
840.2 1000.2 1060.2 1140.2 1220.2 1270.2 1480.2 1630.2 1730.2 1930.2
Cooling Capacity KW 840 1000 1060 1140 1220 1270 1480 1630 1730 1930
10⁴kcal/h 72 86 91 98 105 109 128 141 149 166
Operation Control Type PLC Programmable Controller Automatic Control
Power Supply 380V/3N/50Hz
Compressor Type 5-6 Non Symmetrical Half Closed Double Screw Compressor
Quantity 2 unit
Startup Type Y-△ Start-up
Energy Regulation 0-12.5-25-37.5-50-62.5-75-87.5-100%
Input Power KW 168.2 199.4 210.4 228 245.6 253.4 295 324 344 386.8
Rated Current A 292.7 347 366.1 396.7 427.3 440.9 513.3 563.8 598.6 673
Evaporator Type High Efficiency Shell and Tube Dry Heat Exchanger
Water Flow M³/h 144 172 182 196 210 218 256 282 298 332
Pipe Diameter DN150 DN200
water Pressure Drop Kpa 70 70 72 72 73 73 73 73 74 74
Condenser Type High Efficiency Shell and Tube Heat Exchanger
Water Flow M³/h 180.6 215 227.9 245.1 262.3 273.1 318.2 350.5 372 415
Pipe Diameter DN125×2 DN150×2
water Pressure Drop Kpa 65 65 70 72 73 73 73 73 76 76
Refrigerant Type R22a/R407c/R134a/R410a
Filling Quantity kg 167 199 211 227 243 253 295 324 344 384
Dimension Length mm 3895 3890 3890 3890 3890 3950 4080 4200 4200 4350
Width mm 1300 1300 1500 1500 1500 1500 1500 1500 1500 1500
Height mm 2050 2050 2230 2230 2260 2260 2280 2280 2280 2280
Unit Weight kg 5300 6000 6300 7000 7300 7600 8100 8300 8400 9200
Run Weight kg 6050 6600 6800 7550 7850 8050 8600 8900 9000 9800

Note:

1. The nominal operating cinditions are follows:frozen water inlet/outlet temperature of 12℃/7℃;cooling water inlet/outlet temperature of 30℃/35℃.

2. Temperature conditions: the water outlet temperature of chilled water temperature range of 5℃-15℃, cooling water inlet temperature range of 19℃-33℃.

3.The water side of the evaporator and condenser design to withstand the pressure of 1.0MPa.

4. The nominal operating conditions in the evaporator water side fouling coefficient of 0.018m²℃/kw, condenser water side fouling coefficient of 0.044m²℃/kw.

5. In addition to the above specifications and requirements, the company can provide non-standard products according to customer requirements.

Parameter/Model ZQZIP®-
1540.4 1680.4 2000.4 2120.4 2280.4 2440.4 2540.4 2960.4 3260.4 3460.4 3860.4
Cooling Capacity KW 1540 1680 2000 2120 2280 2440 2540 2960 3260 3460 3860
10⁴kcal/h 133 145 172 183 197 210 219 255 282 298 333
Operation Control Type PLC Programmable Controller Automatic Control
Power Supply 380V/3N/50Hz
Compressor Type 5-6 Non Symmetrical Half Closed Double Screw Compressor
Quantity 4 unit
Startup Type Y-△ Start-up
Energy Regulation Between 0-100% 16 level regulation or non pole adjustment
Input Power KW 312 336.4 389.8 420.8 456 491.2 506.8 590 648 688 773.6
Rated Current A 542.9 585.3 693.9 732.2 793.4 854.7 881.8 1026.6 1127.5 1197.1 1346.1
Evaporator Type High Efficiency Shell and Tube Dry Heat Exchanger
Water Flow M³/h 266 1290 344 366 394 420 438 510 564 596 666
Pipe Diameter DN250 DN300
water Pressure Drop Kpa 75 75 78 78 80 82 83 83 84 85 85
Condenser Type High Efficiency Shell and Tube Heat Exchanger
Water Flow M³/h 331.1 361.2 430 455.8 490.2 524.6 546.1 636.4 700.9 743.9 829.9
Pipe Diameter DN200×2 DN250×2
water Pressure Drop Kpa 80 80 82 82 84 84 85 85 86 87 87
Refrigerant Type R22a/R407c/R134a/R410a
Filling Quantity kg 307 334 398 422 454 486 506 589 649 689 768
Dimension Length mm 5020 5220 5220 5460 5590 5590 5590 5590 5590 5600 5950
Width mm 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
Height mm 2120 2120 2120 2275 2280 2280 2280 2280 2280 2300 2300
Unit Weight kg 8700 9100 10000 10500 11600 12800 13400 14000 14800 16250 17450
Run Weight kg 9450 9850 10750 11250 12500 13750 14100 15000 15900 17450 18500

Note:

1. The nominal operating cinditions are follows:frozen water inlet/outlet temperature of 12℃/7℃;cooling water inlet/outlet temperature of 30℃/35℃.

2. Temperature conditions: the water outlet temperature of chilled water temperature range of 5℃-15℃, cooling water inlet temperature range of 19℃-33℃.

3.The water side of the evaporator and condenser design to withstand the pressure of 1.0MPa.

4. The nominal operating conditions in the evaporator water side fouling coefficient of 0.018m²℃/kw, condenser water side fouling coefficient of 0.044m²℃/kw.

5. In addition to the above specifications and requirements, the company can provide non-standard products according to customer requirements.